Array series board level camera

 Array Series – Machine vision board cameras

The Array is a series of board cameras that capture high resolution images at a high frame-rate.  Designed to be used as a single unit or in an array as a complete multi-camera capture solution with each camera synchronized across a USB3 bus, as well as external sync via input and output trigger strobes, and included multi-camera geometric calibration. Each sensor can capture high resolution images at high frame rates (60FPS+ and higher), with a USB3 interface. Windows 7/8 software tools and open source SDK, Linux SDK, and ROS module provided.

Available models: bu3ar0330, bu3mt9m031m, bu3mt9m031c, bu3mt9j003, bu3imx174m, bu3imx174c, bu3cmv4000m, bu3cmv4000c.

  • See our technical specs for resolution + framerate ranges
  • Low latency
  • GPIO: 2x opto-isolated inputs, 2x opto-isolated outputs. Camera trigger input and output strobe.
  • On-board color processing: debayer, gamma, brightness, digital gain, LUT remap
  • 12-bit raw mode, 10-bit raw mode, 8-bit raw mode
  • Synchronize multiple cameras over USB3 bus
  • Multi-camera calibration
  • Multi-camera recording
  • C, C++, GenICam/GenTL, ROS
  • Windows 7, 8, 10, Linux 3+


Please contact us for pricing and availability.
Category: .
Max Resolution3.3 MP (2304x1536)1.2 MP (1280x960)1.2 MP (1280x960)10 MP (3664x2748)2.35 MP (1936x1216)2.35 MP (1936x1216)4 MP (2048x2048)4 MP (2048x2048)
Max Frame Rate60 FPS60 FPS60 FPS60 FPS164.5 FPS164.5 FPS180 FPS180 FPS
Max Data Rate>270 MB/s>270 MB/s>270 MB/s>270 MB/s>270 MB/s>270 MB/s>270 MB/s>270 MB/s
Max Optical Format1/3"1/3"1/3"1/2.3"1/1.2"1/1.2"1"1"
Bit Depths12, 10, 812, 10, 812, 10, 812, 10, 812, 10, 812, 10, 812, 10, 812, 10, 8
Dynamic Range (Linear)72.4 dB64 dB64 dB65.2 dBN/AN/A60 dB60 dB
HDR SupportNoNoNoNoNoNoNoYes
SNR max39 dB38 db38 db34 dBN/AN/AN/AN/A
Pixel Size2.2µm3.75µm3.75µm1.67µm5.86µm5.86µm5.5µm5.5µm
Multi-camera syncCameras on same USB3 controller will automatically sync to better than 125us
Image FormatRaw, RGB, YUV, YUV422, YUV420
On-camera debayerYesYesYesYesYesYesYesYes
On-camera color processingYesYesYesYesYesYesYesYes
Camera storage32 KB32 KB32 KB32 KB32 KB32 KB32 KB32 KB
Max Cable Length15 feet, longer with active extenders
SensorAptina AR0330Aptina MT9M031Aptina MT9M031Aptina MT9J003Sony IMX174LLJ-CSony IMX174LQJ-CCmosis CMV4000-xE12M1PPCmosis CMV4000-xE5C1PP
Trigger InputYesYesYesYesYesYesYesYes
Trigger OutputYesYesYesYesYesYesYesYes
Manual Exposure ControlYesYesYesYesYesYesYesYes
Automatic Exposure ControlYesYesYesYesYesYesYesYes
Manual Gain ControlYesYesYesYesYesYesYesYes
Automatic Gain ControlYesYesYesYesYesYesYesYes
Power Consumption<2W<2W<2W<2W<2W<2W<2W<2W
GPIO2 opto-isolated inputs, 2 opto-isolated outputs
OS SupportWindows 7, 8, 10, Linux 3+
API SupportIndigo SDK, GenICam/GenTL, ROS
Open Source DriverYesYesYesYesYesYesYesYes
Sensor cover650nm IR CutClear glass650nm IR Cut650nm IR CutClear glass650nm IR CutClear glass650nm IR Cut
Lens MountCS-mountCS-mountCS-mountCS-mountCS-mountCS-mountCS-mountCS-mount
IP RatingIP67 (optional)IP67 (optional)IP67 (optional)IP67 (optional)IP67 (optional)IP67 (optional)IP67 (optional)IP67 (optional)
Width1.63" (41.4mm)1.63" (41.4mm)1.63" (41.4mm)1.63" (41.4mm)1.63" (41.4mm)1.63" (41.4mm)1.63" (41.4mm)1.63" (41.4mm)
Height1.63" (41.4mm)1.63" (41.4mm)1.63" (41.4mm)1.63" (41.4mm)1.63" (41.4mm)1.63" (41.4mm)1.63" (41.4mm)1.63" (41.4mm)
Depth1.53" (38.8mm)1.53" (38.8mm)1.53" (38.8mm)1.53" (38.8mm)1.53" (38.8mm)1.53" (38.8mm)1.53" (38.8mm)1.53" (38.8mm)

Occam Array Series board camera for machine vision, computer vision, research and development


Array Series – Machine vision board camera

Array is a series of USB 3.0 camera for machine vision that can be used standalone or in an array as a complete multi-camera capture solution. Each Array sensor is a board camera that can capture high resolution images at high frame rates, returning raw image data to the host system by USB3. The cameras were designed to be deployed in multiples, and supports easy synchronization over the USB3 bus with other Occam cameras as well as external sync via input and output trigger strobes.

Windows software tools provide full multi-camera geometric calibration and recording support. An open source Windows/Linux SDK and ROS module are provided, as well as GenICam driver for wide base of third party software compatibility.

Designed for use in machine vision, manufacturing and industry, as well as research and development and computer vision / machine vision end uses.

Array series machine vision computer vision board camera